Aux 2 Unit 3 Hydraulic systems, anchor windlass, stabiliser Flashcards

Aux 2 Unit 3 Hydraulic systems, anchor windlass, stabiliser

What component ensures the hydraulic system can store energy for immediate use during starting?

B) The hydraulic accumulator

What is the role of the hydraulic piston in the starting system?

B) To push the rack and create the linear motion needed for starting

How does a pressure relief valve protect a hydraulic system?

B) It limits the maximum pressure to prevent damage

What happens to the hydraulic fluid after it leaves the actuator?

B) It returns to the reservoir for reuse

What component is responsible for converting hydraulic pressure into mechanical movement in the fin stabilizer system?

B) Hydraulic actuator (cylinder)

Which part of the hydraulic system ensures smooth operation and prevents abrupt movements of the fin stabilizers?

B) Flow control valve

What role does the rack play in a hydraulic rack and pinion starting system?

B) It converts the linear motion of the hydraulic piston into rotary motion

Why is hydraulic oil preferred over water in hydraulic systems?

B) Hydraulic oil provides better lubrication and is less compressible

In a hydraulic circuit for a stabilizer, which component directs the fluid to control the movement of the stabilizer?

B) Directional control valve

What is the primary function of a hydraulic system in adjusting the angle of fin stabilizers on a vessel?

B) To control the angle of the stabilizer fins for minimizing vessel roll

What is the primary function of a hydraulic rack and pinion starting system?

B) To provide mechanical power for engine starting

How does a speed control valve operate in a hydraulic system?

B) By restricting the flow of hydraulic fluid through adjustable orifices

Which of the following best describes the role of an accumulator in a hydraulic circuit for a stabilizer?

B) It stores energy in the form of pressurized fluid to smooth out pressure fluctuations

What advantage does a hydraulic actuator have over an electrical actuator in terms of system response?

B) Faster and more forceful response to load changes

Which of the following is a key component of a hydraulic power system used for an anchor windlass?

B) Hydraulic accumulator

What type of pump is typically used in a constant pressure hydraulic power system for an anchor windlass?

B) Fixed displacement pump

What is the function of the hydraulic reservoir in the stabilizer system?

B) To store and supply hydraulic fluid to the system

Which component in the hydraulic power system is responsible for directing fluid to the anchor windlass motor?

B) Directional control valve

Which characteristic of hydraulic actuators makes them well-suited for marine stabilizers?

B) Ability to withstand exposure to water without significant electrical hazards

Which of the following best describes the symbol for a directional control valve in a hydraulic system?

B) A series of squares with arrows and lines indicating flow paths and positions

What is the purpose of the reservoir in a hydraulic power system for an anchor windlass?

B) To store hydraulic fluid

Why is a control valve essential in a hydraulic rack and pinion starting system?

B) To regulate the flow of hydraulic fluid and control system operation

What type of actuator is used for linear motion in a hydraulic system?

B) Hydraulic cylinder

Which of the following actions is performed by a directional control valve?

C) It changes the direction of the fluid flow

What ensures the hydraulic system does not overheat during prolonged operation?

B) A heat exchanger or cooler

Which of the following is NOT a main component of a hydraulic system?

C) Battery

What is the main purpose of a speed control valve in a hydraulic system?

B) To control the rate of flow, thereby adjusting the speed of actuators

How does an accumulator contribute to the operation of the hydraulic system for fin stabilizers?

B) It stores energy in the form of pressurized hydraulic fluid for quick adjustments

What is the role of the directional control valve in a hydraulic system for fin stabilizers?

B) To control the direction of hydraulic fluid flow to the actuator

Which of the following is a main component of a hydraulic rack and pinion starting system?

B) Hydraulic accumulator

What is the primary function of a directional control valve in a hydraulic system?

B) To direct the flow of fluid to specific actuators

What is the function of a directional control valve in a hydraulic system?

C) To direct the flow of hydraulic fluid to various components

Which of the following is a main component of a hydraulic system used to adjust the angle of fin stabilizers?

A) Hydraulic accumulator

How does the system maintain constant pressure when the pump runs continuously?

B) Through an accumulator that stores pressurized fluid

Why are hydraulic actuators generally preferred over electrical actuators for vessel stabilizers?

B) They offer greater force and power density, ideal for heavy-duty marine applications

How does a brake valve help in maintaining safety in hydraulic systems?

B) By maintaining backpressure to prevent rapid or unintended movements of actuators

Why is a pressure relief valve included in the hydraulic system for adjusting fin stabilizers?

B) To maintain consistent pressure and prevent system over-pressurization

What is the fundamental operating principle of a hydraulic system?

B) It uses fluid under pressure to transmit and amplify force

Which component in a hydraulic rack and pinion starting system is responsible for initiating rotation of the engine’s crankshaft?

B) The pinion gear

What role does the pump play in a hydraulic system?

B) It generates pressure to move the fluid through the system

Which component ensures that hydraulic fluid flows in one direction only to prevent backflow?

B) Check valve

What is the function of a brake valve in a hydraulic system?

B) To prevent uncontrolled motion of an actuator by maintaining backpressure

What is the primary function of a hydraulic power system for an anchor windlass on a vessel?

B) To lift and lower the anchor efficiently using hydraulic power

What component is essential in a hydraulic circuit for a single stabilizer to maintain constant pressure?

A) Pressure relief valve

What safety feature is commonly included in a hydraulic power system to prevent over-pressurization?

A) Pressure relief valve

What type of fluid is typically used in hydraulic systems?

B) Special hydraulic oil or synthetic fluid

Why is a check valve included in the hydraulic circuit of a stabilizer system?

B) To prevent backflow and ensure unidirectional flow

What is the primary function of an actuator in a hydraulic system?

B) To convert hydraulic energy into mechanical energy
1 / 48