Aux 2 Unit 9 Refrigerant Under/ re-charge, leaks, trouble shooting Flashcards

Aux 2 Unit 9 Refrigerant Under/ re-charge, leaks, trouble shooting

What is a key feature of a zeotropic refrigerant blend?

B) It has a temperature glide during phase changes

What property of refrigeration oil is important for compatibility with refrigerants?

C) High miscibility with refrigerants

What tool is used to remove non-condensable gases from a refrigeration system during operation?

C) An air purger

Why is it important to wear proper personal protective equipment (PPE) during the re-charging process?

 

B) To protect against potential exposure to refrigerant and ensure safety

What is a likely symptom of an overcharged refrigeration system?

B) Reduced heat transfer in the condenser due to liquid flooding

Which of the following can result in the unexpected stoppage of a refrigeration compressor?

B) Malfunctioning thermostat or pressure switch

What is the first safety step to take before beginning the liquid charging process of a refrigeration plant?

B) Ensure proper personal protective equipment (PPE) is worn

What is the most effective method for removing air from a refrigeration system?

B) Using a vacuum pump to evacuate the system

What state should be used for charging a near-azeotropic refrigerant blend?

A) Liquid state

What is an advantage of using an electronic leak detector?

A) It works without adding any substances to the system

What is one way to safely release excess refrigerant if the system is overcharged?

B) Use a refrigerant recovery machine

What is a consequence of having air in the refrigeration system?

B) Higher temperature differential across the condenser

Which of the following is a commonly used method for detecting a refrigerant gas leak?

B) Ultraviolet (UV) dye method

What is a characteristic of using an electronic leak detector to find a refrigerant leak?

B) It emits a sound or visual alert when it senses the presence of refrigerant gas

What is a critical check to perform during the liquid charging process?

B) Monitoring system pressure and temperature to avoid overcharging

What could happen if an undercharged system is not addressed promptly?

B) The compressor may overheat and become damaged

What is a potential limitation of the bubble method for detecting refrigerant leaks?

C) It may not detect very small or slow leaks effectively

Which of the following is a common reason for a refrigeration compressor to stop unexpectedly after running for a short period?

C) High pressure trip due to condenser blockage

What should be done after repairing leaks in an undercharged refrigeration system?

B) Recharge the system with the appropriate amount of refrigerant

Why is it important to check the system for leaks before liquid charging?

B) To prevent refrigerant from escaping during charging

What is the purpose of running the system briefly after the initial charge?

B) To check for refrigerant leaks and confirm pressure stabilization

Which property of refrigeration oil helps prevent the formation of sludge and deposits?

B) High chemical stability

Which of the following is a critical check after recharging a previously undercharged refrigeration system?

C) Monitoring system pressures and temperatures to confirm proper operation

Which of the following methods involves applying a soapy solution to refrigeration joints to find leaks?

B) Bubble method

At what point should the vapor charging hose be connected to the system?

B) After ensuring the system is isolated and there are no leaks

What is meant by "short cycling" in a refrigeration system?

B) The system stops and starts frequently without completing normal cycles

Which of the following is an indication of an undercharged refrigeration system?

A) High superheat at the evaporator outlet

Which method would be best for locating a leak in a system that cannot be opened or exposed easily?

C) Electronic leak detector

What is one effect of short cycling on a refrigeration system?

C) Reduced efficiency and potential compressor damage

Which condition can lead to air being introduced into a refrigeration system?

C) Improper evacuation procedures

What is the first step before starting the vapor re-charging of a refrigeration plant?

B) Shut down the system and ensure it is isolated

What is a common indication of an undercharged refrigeration system?

 

B) Low suction pressure and reduced cooling efficiency

What should be monitored during the charging process to ensure proper system function?

B) System temperature and pressure readings

What could lead to a refrigeration compressor stopping unexpectedly due to electrical issues?

C) Faulty motor starter or electrical relay

What step should be taken after evacuating a refrigeration system with a vacuum pump?

C) Monitor the system for vacuum retention before charging with refrigerant

What is a common symptom of an undercharged refrigeration system?

B) Low refrigerant temperature and reduced cooling capacity

Why is it necessary to check for leaks before re-charging a refrigeration plant?

B) To ensure refrigerant does not escape during charging

Which of the following is a common way for air to enter a refrigeration system?

B) During system servicing or repairs

How should the refrigerant cylinder be positioned for liquid charging?

A) Upside down to allow liquid withdrawal

How should the refrigerant cylinder be positioned during vapor re-charging?

A) Vertically with the valve up to allow vapor withdrawal

Why is air considered undesirable in a refrigeration system?

C) It can lead to higher condenser pressure and reduced system efficiency

What is another benefit of using an oil separator in a refrigeration system?

B) To enhance the system's energy efficiency by maintaining proper oil levels in the compressor

What is a possible cause of an undercharged refrigeration system?

C) Refrigerant leakage in the system

Why is an oil separator used in vapor compression refrigeration systems?

B) To prevent oil from entering the evaporator and affecting heat transfer

What is the required state for charging a zeotropic refrigerant blend?

B) Liquid state

How does the UV dye method help in detecting a refrigerant leak?

B) By using ultraviolet light to reveal leaked dye at the leak site

What type of protective gear is most important during the liquid charging process?

B) Gloves and safety goggles for handling refrigerant

What should be done after the liquid charging is complete and the system is running?

B) Check for leaks and monitor the system's performance

What visual sign might indicate an undercharged system?

C) Bubbles or vapor in the sight glass

Why must liquid charging be done slowly and carefully?

B) To prevent thermal shock to the compressor

Which of the following is a key property of refrigeration oil?

B) Low pour point

How does an oil separator return separated oil to the compressor?

C) By using a float valve that opens when sufficient oil accumulates

Which of the following could cause a refrigeration compressor to stop unexpectedly after running briefly?

B) Low refrigerant pressure triggering the low pressure cut-out

Where is an oil separator typically installed in a refrigeration system?

C) On the discharge line of the compressor

What could be a potential cause of overcharging in a refrigeration system?

C) Adding too much refrigerant during maintenance

What step should be taken to ensure the refrigerant enters the system at the correct rate?

B) Adjust the charging valve gradually and monitor the system pressure

What state is recommended for charging an azeotropic refrigerant blend?

C) Either vapor or liquid, as it behaves like a single-component refrigerant

What fault could result in a low pressure cut-out stopping the compressor?

B) Leaking refrigerant or undercharge

What is a common cause of short cycling in a refrigeration system?

C) Faulty pressure control or defective thermostat

What is the characteristic of an azeotropic refrigerant blend?

B) It behaves like a single-component refrigerant with no significant temperature glide

What fault could lead to a high pressure trip and stoppage of a refrigeration compressor?

B) Clogged condenser or poor heat dissipation

At what point should the liquid refrigerant be added to the system?

B) When the system is under vacuum

What is the main function of an oil separator in a refrigeration system?

B) To separate oil from the refrigerant and return it to the compressor

What is the first step in remedying an undercharged refrigeration system?

B) Check for and repair any refrigerant leaks

What should be done if the system shows signs of overcharging during the process?

B) Remove excess refrigerant carefully and check pressure levels

What is true about a near-azeotropic refrigerant blend?

C) It has a very low temperature glide, close to that of an azeotrope

Before connecting the liquid charging hose, what should be done to ensure system safety?

C) Confirm that the system is isolated and at rest
1 / 67