Aux 2 Unit 8 Refrigeration General overview Flashcards

Aux 2 Unit 8 Refrigeration General overview

Which basic law of refrigeration involves the compression of a refrigerant gas?

C) Compression increases the pressure and temperature of the gas

What is the primary purpose of the expansion valve in a refrigeration system?

C) To reduce the pressure and temperature of the refrigerant before it enters the evaporator

What is another reason for the activation of a high pressure cut-out in a refrigeration system?

B) To prevent potential damage to the condenser

Where does the refrigerant go immediately after leaving the compressor?

B) To the condenser

Which part of the refrigeration system does the high pressure cut-out monitor?

C) The discharge line of the compressor

What process takes place in the condenser of a vapor compression refrigeration system?

B) The refrigerant releases heat and condenses into a sub-cooled liquid

Where is the expansion valve located in the refrigeration cycle?

B) Between the condenser and evaporator

Why is the evaporator critical in the refrigeration cycle?

D) It absorbs heat, providing the cooling effect needed in the system

How does the high pressure cut-out operate in a vapor compression refrigeration system?

C) It stops the compressor when the discharge pressure exceeds a set limit

What happens to the refrigerant in the evaporator?

C) It absorbs heat from the surroundings and evaporates into a vapor

Why might a high pressure cut-out be triggered in a refrigeration system?

B) Blockage or insufficient airflow in the condenser

In a basic vapor compression refrigeration system, what happens to the refrigerant in the evaporator?

B) It absorbs heat and evaporates, becoming superheated vapor

What does the term "sub-cooled" mean in a refrigeration system?

C) The refrigerant is cooled below its condensation temperature while remaining a liquid

What is the main function of the compressor in a vapor compression refrigeration cycle?

C) To compress the low-pressure refrigerant vapor and increase its pressure and temperature

What is the "saturation temperature" in a refrigeration system?

B) The temperature at which the refrigerant condenses or boils

What is the purpose of the expansion valve in a basic vapor compression refrigeration system?

B) To cool the refrigerant by reducing pressure, causing partial evaporation

Which of the following is a reason for the operation of a high pressure cut-out in a vapor compression refrigeration system?

B) To protect the compressor from damage due to excessive discharge pressure

How is the low pressure cut-out reset in most refrigeration systems?

A) By manually pressing a reset button

Where is the high pressure cut-out typically located in a refrigeration system?

B) On the discharge line of the compressor

Why is the condenser important in the refrigeration cycle?

C) It removes the heat absorbed in the evaporator and converts the refrigerant to a liquid

What does the term "superheated" mean in the context of refrigeration?

B) The refrigerant is heated beyond its boiling point and remains a vapor

What is the state of the refrigerant as it exits the compressor in a vapor compression system?

C) Superheated vapor

What principle explains the cooling effect in the refrigeration cycle when the refrigerant evaporates?

B) Evaporation absorbs heat, causing a cooling effect

Which of the following is one of the basic laws of refrigeration?

B) Heat flows from hot to cold when there is a temperature difference

What happens after the high pressure cut-out is triggered in a refrigeration system?

B) The cut-out must be manually reset to resume operation

Where is the low pressure cut-out generally located in a refrigeration system?

C) Near the suction side of the compressor

What happens to the refrigerant in the condenser?

C) It releases heat and condenses into a liquid

How can the high pressure cut-out be reset?

B) It must be manually reset using a button or switch on the control panel

Where in the vapor compression system does the refrigerant become sub-cooled?

B) After leaving the condenser
1 / 29